FloodStop for Water Conditioner

Prevent Water Conditioners from flooding your property:
Water Conditioners and related fittings can be the cause of extensive water damage. Because Water Conditioners are continually under pressure, even small pressurized leaks can quickly flood and devastate a home. Whether at home, at work, or on vacation these flooding events can go undetected for hours or even days.

FloodStop (FS 3/4-NPT), (FS 3/4-C), (FS 1.00-NPT), (FS 1.25-NPT) and (FS 1/2-NPT) kits automatically shut off the water supply to the Water Conditioner and sounds an alarm, leaving all other household fixtures and appliances operational. Powered by AC/DC Adaptor/Transformer or Batteries. Output contact available, which allows the Controller to connect with Alarm, Home Automation or Auto-Dialer systems if desired. Easily installed in fifteen minutes.

FloodStop (FS 3/4-NPT)

  • Motorized Full-Port Ball Valve (3/4 inch NPT pipe threaded)
  • Control Unit (with Battery Backup 4 X AA Size)
  • Water/Leak Sensor (1.25” X 7.5”)
  • AC/DC Power Adaptor (or use 4 X AA Batteries as Primary Power Source)
  • Output Contact Wires (2)
  • Specification Sheet (find the link in right margin of this webpage)
FloodStop (FS 3/4-C):

  • Motorized Full-Port Ball Valve (3/4 inch pipe Compression fittings)
  • Control Unit (with Battery Backup 4 X AA Size)
  • Water/Leak Sensor (1.25” X 7.5”)
  • AC/DC Power Adaptor (or use 4 X AA Batteries as Primary Power Source)
  • Output Contact Wires (2)
  • Specification Sheet (find the link in right margin of this webpage)
  • Output Contact Wires (2)
FloodStop (FS 1.00-NPT):

  • Motorized Full-Port Ball Valve (1 inch NPT pipe threaded)
  • Control Unit (with Battery Backup 4 X AA Size)
  • Water/Leak Sensor (1.25” X 7.5”)
  • AC/DC Power Adaptor (or use 4 X AA Batteries as Primary Power Source)
  • Output Contact Wires (2)
  • Specification Sheet (find the link in right margin of this webpage)
FloodStop (FS 1.25-NPT):

  • Motorized Full-Port Ball Valve (1 1/4 inch NPT pipe threaded)
  • Control Unit (with Battery Backup 4 X AA Size)
  • Water/Leak Sensor (1.25” X 7.5”)
  • AC/DC Power Adaptor (or use 4 X AA Batteries as Primary Power Source)
  • Output Contact Wires (2)
  • Specification Sheet (find the link in right margin of this webpage)
FloodStop (FS 1/2-NPT):

  • Motorized Full-Port Ball Valve (1/2 inch NPT pipe threaded)
  • Control Unit (with Battery Backup 4 X AA Size)
  • Water/Leak Sensor (1.25" X 7.5")
  • AC/DC Power Adaptor (or use 4 X AA Batteries as Primary Power Source)
  • Output Contact Wires (2)
  • Specification Sheet (find the link in right margin of this webpage)
How FloodStop Works (FS 3/4-NPT, FS 3/4-C, FS 1.00-NPT, FS 1.25-NPT and FS 1/2-NPT):

  • The FloodStop valve is installed between the Water Conditioner and its manual shutoff valve.
  • Water/leak sensor is placed at the base of the Water Conditioner
  • Valve stays open until water loss is detected
  • Water on sensor closes FloodStop valve and sounds alarm
  • Valve stays closed until problem is attended to and system is reset

Product Literature

Component Images

Optional Accessories

With FloodStop, Property Damage is Avoided:

Water loss from unexpected appliance failures and hose ruptures are detected by FloodStop's water/leak sensor, and the water supply is automatically and immediately shut off.